DC Bride and Groom
The Bride and Groom was built in 2005 and
was very lightly used for 2 seasons (a grand total of 8 days).
The bride and groom props are multi movement animatronic props that are
based off DC Design Studio custom robotic armatures with Unit 70 foam
skeletons foamed around the armatures to completely conceal all moving
parts. Unit 70 also did all of the (visual) finishing (painting, antique
clothing, etc.).
These props were used in our 2005 and 2006 haunt (approximately 10 days total) and are in great cosmetic and mechanical condition.
The movements included on each character are: head turn, left arm raise, left elbow, right arm raise, right elbow, and body lean. They were originally designed to walk, so there is a very elaborate hip mechanism that allows for multiple movements.
Both props tower at over 6' and slide easily onto a 24" x 48" custom prop base and include an SMC valve bank with 12+ valves.
This prop cost over $4000 and no longer fits into our haunt, so we'd rather part with them instead of putting into long term storage.
A controller is not included with this prop and the base has been rebuilt to allow the props to stand alone or paired together. Base must be screwed/bolted to a larger base if the animation is fast.
Shipping will require freight and packaging (approx $300-$400).
Local Pickup available
All mechanisms designed to operate at 60-80PSI, while being rated up to 125PSI
Click
here for a video of the Bride and Groom in action in '06
Price $2600.00
If you have any questions or would like more information, please e-mail
me at brent@deviousconcoctions.com
Animated Obelisk with Corpsed Skeleton
The Animated Obelisk is a multi-movement prop that features a 4' obelisk
(granite finished) that hinges at its rear half, lifting the entire front
face of the obelisk to reveal a corpsed skeleton that is in a seated position.
Once the obelisk is fully open, the skeleton stands up and lunges its
arms forward.
These pictures show the 1st version, the body shown was replaced with
a skeleton due to size constraints.
The obelisk is slightly used (looks brand new), and the corpsed skeleton
and pneumatics are all 100% brand new never been used.
This price does not include a controller or audio, but we can easily add
it for an additional charge. Requires UPS oversized shipping.
Price $1800.00
DC Winged Skeleton
The winged skeleton is a design based off Vile Things design and was
created in 2006 for the DC Cemetery. The skeleton itself is a Michael
Burnett light weight foam skeleton (purchased for $450) that was modified
with steel inserts in the ribcage, spine and wing pack. The wings are
removable and the marionette is animated using a heavy duty "Crank
Ghost" platform.
The Skeleton is also epoxy coated for durability, then antiqued with an
aged bone finish. A UV coating was then added that is clear until put
under blacklight, which then gives off an eerie bluish glow.
This prop cost well over $1000 in materials and easily had over 100hrs
of labor.
Price $900.00
Below are products designed, manufactured and or supported by DC
(check out www.dcprops.com
for custom design work)
DC Prop Builders Handbook (Volume 1)
The DC Prop Builders Handbook is 135 pages of highly detailed prop building instructions, including tons of pictures and diagrams to aid you in the construction of 22 of our prop designs. The designs included in this book are: The Skeletal Organist, Pipe Organ, Stump Jumper, Rocking Chair, two Coffins, Ghost Heads, Pneumatic lifter, Pneumatic Extender, and many more. The book also has a section on basic pneumatics to guide you on your way to create your own (pneumatically driven) Devious Concoctions.
Price $40.00
DC Prop Builders Handbook (Volume
2)
The Second DC Prop Builders Handbook is the newest addition to the DC Prop Builders Handbook series featuring 137 pages of extremely descriptive instructions to create yet another 10 of our unique designs. These designs include the following: Heavy Duty Lifter, Pneumatic Extender (scissor lift/extender), Drop Panels, Un-Dead Coffin (and erector mechanism), Thrashing Corpse, Thrashing Doors, The Mourner, Lightning Window, Air Cannons, & Pneumatic Web Shooter.
The second edition was been in the makings for almost two years, so no expense has been spared in detailing every step, as well as the addition of a multitude of diagrams for every drilling pattern and questionable construction step. The second book also has far more pictures added (average of 2 per page) with much higher resolution prints. So the building process should be easy to follow even though the props are slightly more difficult.
The book also has an in depth introduction to computer control and pneumatics, so not only will you have the instructions to build the prop, but the knowledge of it's internal workings and a means of control.
Price $40.00
DC Prop Book Bundle
Get Both DC Prop Book volumes 1 & 2 at an additional savings.
Price $75.00
Fans of DC bundle price $62.00
DC 2007 Haunt Video (DVD)
The 2007 video features 28 minutes of all
of our newest concoctions.
The video is professionally edited and includes haunt footage, haunt footage
with actual audio and behind the scenes shots of the cemetery and individual
props. The video is composed on one high quality DVD, and are great for
a mid year halloween fix.
Price $8.00
DC 2005/2006 Haunt Video with bonus footage
The 2005/2006 video compellation features
90 minutes of all of our newest concoctions in the 2006 and 2005 seasons
as well as a bunch of behind the scenes footage and news coverage.
The video is professionally edited and includes haunt footage, haunt footage
with actual audio and behind the scenes shots of the cemetery and individual
props. The video is composed on one high quality DVD, and are great for
a mid year halloween fix.
Price $12.00
DC 2006 Haunt Video (DVD)
The 2006 video features 28 minutes of all
of our newest concoctions.
The video is professionally edited and includes haunt footage, haunt footage
with actual audio and behind the scenes shots of the cemetery and individual
props. The video is composed on one high quality DVD, and are great for
a mid year halloween fix.
Price $12.00
DC 2005 Haunt Video (DVD)
The 2005 video features 25 minutes of all
of our newest concoctions.
The video is professionally edited and includes haunt footage, haunt footage
with actual audio and behind the scenes shots of the cemetery and individual
props. The video is composed on one high quality DVD, and are great for
a mid year halloween fix.
Price $8.00
DC 2003/2004 Haunts (DVD)
The 2003 DC Haunt video includes 40 minutes of night, infrared,
daylight, behind the scenes, and individual mechanic shots that are once
again not only entertaining, but informative.
2004 Features 30 minutes of all of our newest concoctions.
The DC videos are a great compellation to both of the DC Prop Builders
Handbooks, as well as imagery for inspiration.
Both videos are on one high quality DVD, and are great for a mid year
halloween fix.
Price $12.00
DC 2001/2002 Haunts (DVD)
2001 is DC's earliest edited haunt footage. Great for showing how
DC has progressed over the past 5 years.
The 2002 DC Haunt video includes 32 minutes of night, infrared, daylight,
behind the scenes, and individual mechanic shots that are not only entertaining,
but informative.
The DC videos are a great compellation to both of the DC Prop Builders
Handbooks, as well as imagery for inspiration.
Both videos are on one high quality DVD, and are great for a mid year
halloween fix.
Price $12.00
The DC family of animatronic armatures provide
custom pneumatic mechanisms that are ready to run right out of the box*.
Our armatures provide a means to easy animate most store bought
props, without the hassle of design and fabrication. DC armatures are
the hidden elements in bringing your once static props to life.
DC strongly believes that products should last a lifetime, and we strive to create products that not only last for the life of a prop, but also perform for years with no degradation in performance or safety.
All armatures ship with a standard 110V valve wired with a 6' wired plug,
or for props that are used near water (barrel lifter & spitter) or
will be used in conjunction with a hand held trigger (client specified)
we will wire in a low voltage 12V DC valve and power supply.
All armatures are professionally welded and equipped with professional
valves, quick disconnect fittings, high tensile tubing, and cylinders.
The armatures ship ready to run, and full instructions are available for
download from this site.
So if you've been looking into getting into haunting with pneumatics,
there's now a very simple way of doing it.
Also since we design and fabricate each prop in
house, we have the ability to modify stock designs, integrate additional
items such as haunt controllers, hand held triggers, and or custom add-ons
for controlling lights, foggers, etc., or just about any combination of
automation effects to ensure you receive a complete setup that perfectly
suits your vision.
**Due to the ever rising costs of steel and
related products, these prices may change without notice.
DC Heavy Lifter
The DC Heavy Lifter is a professional built 4 bar lifter that lifts any prop (up to 50lbs safely) 36" from a starting point of 12" up to 48" (lifter platform height). The lifter includes a mounting platform for easy mounting of just about any prop (custom mounting brackets available upon request) that remains parallel to the ground during the entire travel (lift and descent) (ie your prop will only move up and slightly towards the vertical beams of the lifter).
The heavy lifter is perfect for use behind larger tombstones or scenic items with heavier props such as a full skeleton.
Built using 14 Gauge tubular steel and professional pneumatics (bimba cylinder, SMC valve and fittings) Kit includes everything needed to operate and control and ships ready to run* out of the box.
Welded mounting brackets included
Size 30" x 12" x 18"
Price $420.00
DC Medium Lifter
(for standard props)
The DC Medium Lifter is the same mechanism as our heavy lifter, but engineered
to animate lighter props (up to 30-40 lbs safely) from a starting point
of 12" up to 34" (22" of travel).
This lifter is designed as an "all around" lifter for haunt
use, and can be used in a wide range of applications.
The lifter lifts up, and comes forward toward the viewer, so this is
a perfect armature for use behind a bush, tombstone, or other faced item.
Built using 14 Gauge tubular steel and professional pneumatics (bimba
cylinder, SMC valve and fittings) Kit includes everything needed to operate
and control and ships ready to run* out of the box.
Welded mounting brackets included
Size 28" x 18" x 10"
Price $380.00
DC Light Lifter
(for lightweight props)
The The DC Light Lifter was designed to animate simple props such as foam
heads with masks, or upper body props that do not require alot of lifting
force. The light lifter is engineered to operate a 20" travel from
a starting point of 10" up to 30" (lifter platform height).
The light lifter is smaller and a much simpler design then the other
lifters which makes it a great introductory armature for first time users
that have wanted to get into haunting with air, but did not require large
heavy duty mechanisms. Its simplistic design allows a lower price, while
still achieving the strength, durability, and ease of use as the entire
DC line of armatures.
Built using 14 Gauge tubular steel and professional pneumatics (bimba
cylinder, SMC valve and fittings) Kit includes everything needed to operate
and control and ships ready to run* out of the box.
Commonly used behind tombstones or similar objects with smaller light
weight (up to 25lbs) props.
Includes mounting holes in base for easy mounting.
Size 18" x 12" x 10"
Price $295.00
DC Torso Erector
The DC torso lifter is a professional built erector that was built to accommodate the common "bucky" Skeleton and give life(movement) to a once static prop. The erector bolts safely around the spine of the skeleton, and erects a bucky from a laying to sitting up position (approximately 90 degrees).
Perfect for use in coffins or mounted to the ground. Lifter must be bolted or staked into onto a solid surface to ensure the armature and prop remain in its desired location. Welded mounting tabs included.
Due to the fragile nature of the "Bucky" skeletons, DC advises that the skeleton (specifically the arms) be corpsed using latex and cheese cloth to adhere the body together. Corpsing will greatly improve the strength and life span of the skeleton. Works best with arms in static position, such as attached to chest and will prevent flailing arms and possible injury.
Built using 14 Gauge tubular steel and professional pneumatics (bimba cylinder, SMC valve and fittings). Kit includes everything needed to operate and control and ships ready to run* out of the box. Also includes a "stopper" brace to prevent un-desired strain on the cylinder.
Bucky torso not included, but available.
Approximate Size 20" x 10" x 6"
Price $345.00
DC Torso Erector w/ Arm Extension
The DC torso erector with arm extensions is the same mechanism as the Torso Erector, but with an additional armature added to lift the arms from a resting position on the sides of the rib cage, to an outstretched reach in upwards (triggered) position.
Due to the fragile nature of the "Bucky" skeletons, DC advises that the skeleton (specifically the arms) be corpsed using latex and cheese cloth to adhere to the arm bars. Corpsing will greatly improve the strength and life span of the skeleton.
Arms are adjustable at the elbows.
Built using 14 Gauge tubular steel and professional pneumatics (bimba cylinder, SMC valve and fittings). Kit includes everything needed to operate and control and ships ready to run* out of the box. Also includes a "stopper" brace to prevent un-desired strain on the cylinder.
Approximate Size 20" x 16" x 8"
Price $399.00
DC Barrel Lifter
The Barrel lifter is a modified lifter similar to our trash can and wall
mount lifters, but designed for use in a standard 55 gallon steel drum.
The lifter utilizes the barrels strength as its main mounting surface
and utilizes this support to minimize room within the barrel, in turn
allowing larger props to fit within the tight space. Best of all it can
be used (and was designed specifically for) use under water.
The lifter includes two welded mounting brackets that connect into the
barrels wall and approximately 40' of tubing to route the valve far away
from the barrel. This setup includes a 24V valve setup with 110V transformer,
to minimize any risk of shock if used in conjunction with water. However
the wall mount transformer must be placed away from and mounted securely
to a wall, away from areas that may come in contact with water.
Lifter provides 24" of vertical movement measured from the top of
the mounting platform (designed to completely submerge a full bucky torso).
Built using 14 Gauge tubular steel and professional pneumatics (bimba
cylinder, SMC valve and fittings). Kit includes everything needed to operate
and control and ships ready to run* out of the box.
Size 24" x 16" x 6"
Price $365.00
DC Mini Air Cannon
Similar to other manufacturers cannons, but at a fraction of the price,
the DC mini air cannon delivers a large blast of air that is guaranteed
to startle without blowing out your viewers eardrums.
To use this mechanism, simply mount the bracket to a stable wall, apply
power to the valve, attach an air source (ie your air compressor line,
not included), allow the tank to fill (60-80PSI recommended), push the
trigger button and BANG!!!!!!!!
Out fires half a gallon of compressed air in less then a half second.
The DC Cannon also has the option of being fully automated with an AM1
real time controller which includes an infrared sensor and easy to program
sequence. For this automated version, choose "Automated Air Cannon"
button below. Automated version replaces the hand held trigger with a
sensor, but a hand held trigger is available upon request for an additional
charge.
Automation should only be used when small children ARE
NOT going to be present.
No mandatory re-fill is required between firing
with this version.
ONLY FIRE CANNON TOWARDS VIEWERS FEET.
Constructed using only professional parts, the cannon includes a 1/2 gallon
air tank with clip on mounting brackets, High flow dump valve, hand held
trigger and 12v electrical connections.
Price $220.00
Automated version (includes controller w/ PIR) $335.00
DC Air Cannon
Similar to other manufacturers cannons, but at a fraction of the price,
the DC air cannon delivers a huge blast of air that is guaranteed to startle.
To use this mechanism, simply mount the cannon to a stable surface, apply
power to the valve, attach an air source (not included), allow the tank
to fill (60-80PSI recommended), push the trigger button and BANG!!!!!!!!
Out fires gallons of compressed air in less then two seconds.
The DC Cannon also has the option of being fully automated with an AM1
real time controller which includes an infrared sensor and easy to program
sequence. For this automated version, choose "Automated Air Cannon"
button below. Automated version replaces the hand held trigger with a
sensor, but a hand held trigger is available upon request for an additional
charge.
Two minute re-fill is mandatory between firing. Automation should only
be used when small children ARE NOT going
to be present.
ONLY FIRE CANNON TOWARDS VIEWERS FEET.
Constructed using only professional parts, the cannon includes a 5 gallon
air tank with welded mounting brackets, High flow dump valve, resonator,
hand held trigger and 12v electrical connections.
Price $310.00
Automated version (includes controller w/ PIR) $435.00
DC Trash Can Lifter
The DC Trash can lifter is similar to our medium duty lifter, but designed
to fit into standard sized trash cans.
The base is designed to fit in between the formed base of the trash can,
while maximizing floor space for stability and mounting options. The lifter
bars fit within in the circumference of the trash can throughout all movement
while the base removes all strain from the walls of the trash can.
The tight confinements of a trash can were used during design of this
mechanism, and the lifter will provide the most usable space of any mechanism
on the market (or design out there).
DC recommends mounting the lifter through the can into the ground, but
if that is not an option, adding weights to the platform base will also
keep the mechanism in place.
Built using 14 Gauge tubular steel and professional pneumatics (bimba
cylinder, SMC valve and fittings). Kit includes everything needed to operate
and control and ships ready to run* out of the box.
Size 22" x 10" x 12"
Price $385.00
DC Vertical Mover
The DC Vertical Mover was designed for use in areas that only straight up and down movement can be applied (ie. no 4 bar lifter mechanisms).
The DC vertical mover is a vertical slide platform that provides 14"
of vertical movement, while removing all side to side movement and stress
that is placed on a cylinder rod during movement. The mechanism houses
a 14" cylinder between two solid steel guides that provide an extremely
smooth movement with a very strong and stable mounting surface(the
travel on this mechanism can be customized up to 48" per clients
request for an additional charge).
Commonly used inside wine barrels, or to lift partial coffins vertically.
Built using 14 Gauge tubular steel and professional pneumatics (bimba
cylinder, SMC valve and fittings). Kit includes everything needed to operate
and control and ships ready to run* out of the box.
Size 32" x 8" x 12"
Price $440.00
DC Horizontal Mover
The DC Horizontal Mover extends most light/mid weight props (up to 25lbs) horizontally 12" at a slight angle to provide movement to ground moving props such as spiders, ankle grabbing corpses, or similar props. Originally designed to be used in holes or other low light areas where the prop comes towards your viewers*.
Built using 14 Gauge tubular steel and professional pneumatics (110V standard valve included). Kit includes everything needed to operate and control and ships ready to run out of the box.
This extender can be modified to extend up to 24" for an additional charge
Size 26" x 12" x 10"
Price $360.00
* Never use this mover in close proximity to viewers.
DC Spitter Mechanism
The DC Spitter mechanism is the mechanical device that allows for a animatronic
to spray water at viewers when triggered.
Simply run mechanism upwards through the props body, place nozzle into
the mouth, and submerge the feeder tube (purple) into water (1-5 gallon
recommended, but works great in a barrel prop where the reservoir is part
of the prop).
When triggered, water will siphon from reservoir, and a fine mist of water
will shoot between 6-12' out of the mechanism tip.
Kit includes 12V valve, back flow prevention valve, 10' tubing, and feeder
system.
(Skull not included)
Price $130.00
DC Ankle Tickler
The DC ankle tickler features six 12" silicon whips that erratically
whip around your viewers feet.
Controlled via hand held trigger or with an animation controller (controller
is user programmable, extremely easy!).
To operate, simply secure mechanism behind or on wall (you will need to
drill 6 3/8" holes thru wall if mechanism is located behind wall),
apply pressure to main air inlet (runs off 60-120 PSI) and plug in power
supply.
To actuate the manual ankle tickler, simply push hand held trigger button
and whips will begin to whip around erratically.
Kit includes 24V valve, 6' supply hose, six 14" whips, hand held
controller with 12' of wire and air supply hose w/ 1/4" NPT male
fitting.
Price $220.00
DC Drop Panel
Designed to bolt into an existing column (inside dimension of 20" x 50" required) the DC Drop Panel mechanism provides 18" of panel drop for a quick and extremely effective startle.
The drop panel includes welded frame, 3/4" wood panel, 18" cylinder, quick exhaust valve for rapid descent, and all pneumatic tubing, fittings a 110V valve with standard plug, and 1 flow control for control over lift speed.
Can be modified to allow for larger panel and more drop distance. Please
email DC for a quote.
Drop panel is easy to automate using an Animation Maestro 1 or if you want to add an additional startle (we suggest the mini air cannon) an Animation Maestro 2 will allow you to control both effects while integrating an infrared sensor to automate the startles.
Basic:
Price $440.00 (ships ups oversized)
The barrel spitter incorporates a standard 55gal drum, bucky skeleton, and a DC barrel lifter and spitter mechanism that lifts a skeletal torso 22" out of the barrel and is designed for constant submersion.
The basic kit includes barrel with base mount airline fittings (hidden to all viewers), all pneumatic components, semi corpsed skeletal torso with welded steel sub frame (posable), and an animation maestro 2 controller for separate control of lift movement and spit (includes an infrared motion sensor).
Program is setup to detect movement, delay 5 seconds, before ejecting the skeleton upwards and towards your viewers while spitting a heavy mist of water. Skeleton will lower and rise a couple seconds later for one final spray before resetting with a programmed 40 second delay between fires.
Price $900
Ships UPS oversized standard rate
Corpsed $1150
Please allow 2 weeks build time before shipping.
The Bushwacker is a multi movement prop that hides behind a set of silk bushes before lunging forward spitting a mist of water at its viewers. (Silk plants not included).
The Bushwacker shakes the bushes violently before lunging forward and upwards. Bushwacker is controlled via a pre-programmed controller with infrared sensor for triggering movement.
Price includes all mechanics, lightly corpsed skeleton, spitting mechanism, and automated controller with pre programmed sequence and infrared sensor.
Price $1100
Corpsed $1350
Please allow 2 weeks build time before shipping.
The spitting spider is a custom scissor mechanism that launches a 18" latex spider 4' towards its viewers. In addition, it sprays a
a mist of water up to 6' (at 120PSI).
The spiders unique design allows for the spider to start at a low resting height, but rises throughout its travel to approximately 3.5' with the mouth of the spider pointing slightly upwards to spray your viewers at chest level.
Price includes all mechanics, posable 18" latex spider, spitting mechanism, and automated dual output controller with infrared sensor.
Price $850
DC Half Torso Kicker
The DC half torso kicker is a professionally built steel framed armature
for use in a upside down hanging body/torso animation. The legs include
a removable ankle bar to allow the character to be dressed.
Includes 1 cylinder, 1 large valve, all necessary fittings. Requires an
air compressor with a steady 40-60PSI rating. Also includes a heavy duty
chain with removable linkage, and ceiling mounting plate.
A real time controller such as the Animation maestro 1 will allow you
to get extremely life/deathlike movement as well as be triggered via a
infrared sensor. Check out our prop
control section for more information.
Mechanism can also be used laying on a table, for an even weirder effect
Size 42" x 12" x 6"
Price $440.00
DC Half Torso Erratic Kicker
The DC half torso erratic kicker is a professionally built steel framed
armature for use in a upside down hanging body/torso animation. The legs
include separate cylinders allowing this body frame to produce individual
leg movements that are extremely life like and extremely erratic no other
kicker on the market.
Includes 2 cylinders, 1 valve, all necessary fittings. Requires an air
compressor with a steady 40-60PSI rating. Also includes a heavy duty chain
with removable linkage, and ceiling mounting plate. A real time recording
controller such as the Animation maestro 1 will allow you to get extremely
life/deathlike movement as well as be triggered via a infrared sensor.
Check out our prop
control section for more information.
Mechanism can also be used laying on a table, for an even weirder effect
This armature also includes an ankle bar, that allows for the same movement
as our standard kicker.
We recommend using this armature with a flexable body form with no internal
armature from Ghost Ride
Productions.
Size 42" x 12" x 6"
Price $540.00
DC Hangman Kicker
The DC Hangman kicker is a professionally built steel framed armature
for use a hanging animation. The legs include a removable ankle bar to
allow the character to be dressed.
Includes 1 cylinder, 1 valve, all necessary fittings. Requires an air
compressor with a steady 40-60PSI rating. Also includes a heavy duty chain
with removable linkage, and ceiling mounting plate.
A real time recording controller such as the Animation maestro 1 will
allow you to get extremely life/deathlike movement as well as be triggered
via a infrared sensor. Check out our prop
control section for more information.
Mechanism can also be used laying on a table, for an even weirder effect
We recommend using this armature with a flex able body form with no internal
armature from Ghost
Ride Productions.
Size 42" x 12" x 6"
Price $475.00
DC Hangman Erratic Kicker
The DC Hangman erratic kicker is a professionally built steel framed armature
for use in a hanging animation. The legs include separate cylinders allowing
this body frame to produce individual leg movements that are extremely
life like and extremely erratic- no other kicker on the market provides
these movements.
Includes 3 cylinders, 2 valves, all necessary fittings. Requires an air
compressor with a steady 40-60PSI rating. Also includes a heavy duty chain
with removable linkage, and ceiling mounting plate. A real time controller
such as the Animation maestro 2 will allow you to get extremely life/deathlike
movement as well as be triggered via a infrared sensor. Check out our
prop control
section for more information.
Mechanism can also be used laying on a table, for an even weirder effect
We recommend using this armature with a flex able body form with no internal
armature from Ghost
Ride Productions.
Size 42" x 12" x 6" (ships UPS oversized)
Price $595.00
DC Electric Chair Armature
The DC electric chair armature was designed to be used inside a foam body
form to provide violent movement that when used with an automated controller
(programmed with rapid program) to simulate an electrocution.
Includes 1 large cylinder, high flow valve, all necessary fittings. Requires
an air compressor with a steady 80-120PSI rating. Also includes a heavy
duty chain with removable linkage at waist, and ankles. A real time controller
such as the Animation maestro 1 will allow you to get extremely life/deathlike
movement as well as be triggered via a infrared sensor. Check out our
prop control
section for more information.
We recommend using this armature with a flex able body form with no internal
armature from Ghost
Ride Productions.
Size 42" x 12" x 6" (ships UPS oversized)
Price $440.00
Hand held trigger for use with low voltage props or starting one of the controllers below.
If purchased with a DC Mechanism, upon request, we will install at no additional charge.
Price $35.00
Animation Maestro 1
We highly recommend
this controller for single movement prop animation, and for our spitters
and air cannons. Extremely simple to hookup and use.
Repeat Control Timer, Event Control Timer, Flip-Flop Control, Fogger Control,
Puppet a Prop, Light Control… THIS ONE DOES IT ALL!!!
Easy to program just record like you are acting the part yourself ! Powered
by 12vdc power supply (included) can be triggered or run continuous! Follows
what you record for up to 2 Minutes of programming time! Has NO* and NC**
contacts so can turn off light when prop activates! Delay before, Delay
after with perfect precision just wait how long you want!
Flip-Flop lights for a mirror changing illusions! Give some real action
to that "ONE POP WONDER" pneumatic prop! Use as fogger control
to get long and short blasts on a 2 min repeat cycle! Relay rated at 110
vac. so with proper wiring can control any AC prop!
All AM's include an infrared sensor to detect movement and start the
recorded program when someone gets close.
Price with Infrared Sensor $115.00
* Normally Open **Normally Closed
We highly recommend this controller for 2 movement prop animation. Extremely simple to hookup and use!
Repeat Control Timer, Event Control Timer, Flip-Flop Control, Fogger Control, Puppet a Prop, Light Control…
THIS ONE DOES IT ALL!!!
Easy to program just record like you are acting the part yourself ! Powered by 12vdc power supply (included) can be triggered or run continuous! Follows what you record for up to 2 Minutes of programming time! Has NO* and NC** contacts so can turn off light when prop activates! Delay before, Delay after with perfect precision just wait how long you want!
Flip-Flop lights for a mirror changing illusions! Give some real action to that "ONE POP WONDER" pneumatic prop! Use as fogger control to get long and short blasts on a 2 min repeat cycle! Relay rated at 110 vac. so with proper wiring can control any AC prop!
All AM's include an infrared sensor to detect movement and start the recorded program when someone gets close.
Price with Infrared Sensor $155.00
* Normally Open **Normally Closed